Products | A6000 / MMS6000 Systems | Frames & Backplanes

BP 601


Universal Backplane
  • PCB Motherboard for installation of one or two monitoring modules
  • Suitable for modules:
  •    MMS 6110, 6120, 6125
  •    MMS 6140, 6210, 6220
  •    MMS 6410, 6310, 6312
  • External connection via standard cables MMS 6360 and terminal adapters MMS 6361
  • Built-in short-circuit-proof solid state switches on binary outputs
  • Suitable for installation into MMS 6352 or similar 19” rack

BP 1051


Backplane
  • PCB Motherboard for installation of one or two monitoring modules
  • Suitable for modules:
  •    MMS 6110, 6120, 6125
  •    MMS 6140, 6210, 6220
  •    MMS 6410, 6310, 6312
  • Integrated screw terminal for connection of input/output cables
  • Together with mounting rack IMR015 allows installation of MMS 6000 monitors onto rear side of common cubicle
  • No connection or adjusting elements on rear side

BP 1052


Universal Backplane
  • PCB Motherboard for installation of one measuring module and one communication module MMS 6000
  • Right position:
  •    MMS 6110, 6120, 6125
  •    MMS 6140, 6210, 6220
  •    MMS 6410
  • Left position:
  •    MMS 6830, 6831
  •    MMS 6822, 6824, 6825
  • Integrated screw terminal for connection of input/output cables
  • Together with mounting rack IMR015 allows installation of MMS 6000 monitors onto rear
  • Side of common cubicle
  • No connection or adjusting elements on rear side

IMR 6000 / 00


System Frame
  • Component of the MMS 6000 Machine Monitoring System
  • Slots for adaptation of signal processing periphery
  •    Monitors: 10x MMS 6xxx (selection: regarding assembly and functionality)
  •    Logic card: e.g. MMS 6740
  •    Interface card: e.g: MMS 6824
  • External connection to the periphery via 25-pole Sub-D connectors
  • System frame configuration via hardware bridges, solder bridges and configuration of the Dip-switches.
  • Buildup of RS485 bus-lines for integration of all monitors
  • Generation of a master-key signal by a key-monitor at the 1st monitor slot
  • Change over between closed-circuit and open-circuit

IMR 6000 / 10 / 20 / 30


System Frame
  • Component of the MMS 6000 Machine Monitoring System
  • Slots for adaptation of the signal processing periphery (monitors, logic cards and interface cards)
  • External connection of the periphery via spring cage- and screw connection plugs
  • System frame configuration (depending on the version) by hardware via bridges or via Dip- switches
  • Build up of RS485 bus lines for integration and configuration of the monitors with the system frames
  • Generation of master-key signals by a key-monitor at the 1st monitor slot (not at IMR 6000/20)